107, Jalan 17/42, Taman Lawa, Kuala Lumpur, MALAYSIA.
Tel:00-603-62525637 FAX:603-62533476 E-mail:





KENZ 305

Image result for kenz 305


Input Impedance 10 MΩ or more
Leads Standard 12 leads and Cabrera leads (Leads acquisition: Coordinate phase or Real time)
Patient Input One patient
Common Mode Rejection 100 dB or more
Polarization Voltage ± 500 mV or more
Frequency Response 0.05 to 150 Hz, within -3 dB to +0.5 dB
Time Constant 3.2 sec. or more
Filter Digital filter, hum noise · drift (weak/normal), Muscle (35/25 Hz)
A/D Conversion 12 bit (4.88 μV/digit)
Sampling Rate 1,000 sampling/sec. Pacemaker detection, auxiliary function 10,000 samples/sec.
Display System 5.7-inch STN liquid crystal monochrome display with backlight, 320 × 240 dots
ECG Display 3Lead, 3+Rhythm Lead, 12Lead
.Built-in thermal printer
Recording System Thermal Array (8 dot/mm)
ECG Recording Format 1Lead, 1Lead+Rhythm, 3Lead Recording time: 8 to 24 second, Heart rate, Measurement value
Recording Sensitivity 2.5, 5, 10, 20 mm/mV, Auto selection
Recording Speed 5, 10, 12.5, 25, 50 mm/sec.
ECG Paper Roll paper (63 mm in width)
Safety Class I, Type CF
Water Proof Protection Non water proof device (IPXO)
Flammable Anaesthetic Not applicable
Mode of Operation Continuous operation
.Power Source
Rated Power Supply 110 to 240 VAC, 50 to 60 Hz, 90 VA
Rechargeable Battery 12 VDC 1500mAh, Nickel-Metal Hydride battery 3 hours or 700 ECG recordings on a full charge of battery for 8.5 hours. Auto mode: 10 seconds normal waveform and HR 60.
Dimensions 266 mm (W) × 173 mm (D) × 75 mm (H)
Weight Approx. 1.5 kg (including the rechargeable battery)
.Operating Environment
Temperature 10 to 40°C
Humidity 25 to 95% RH (Without dew condensation)
Pressure 700 to 1060 hPa
.Transportation and Storage Environment
Temperature -10 to 60°C
Humidity 25 to 95% RH (Without dew condensation)
Pressure 700 to 1060 hPa
.Communication Port
LAN port IEEE 802.3u 100BASE-TX × 1
USB port 1 port(USB 2.0 compliant)


ECG Machine H3

H3 3-Channel Electrocardiograph

6.2" LCD touch screen (resolution:800×480) 
3×4 and 6×2 display format, 12- lead waveforms display simultaneously; 
Intelligent brightness sensor for automatic screen brightness adjust


Product Specification:-


Detail ECG

Detail ECG 2




Pulse Oximeter -50C
Organic LCD for optimum display clarity
showing SpO2, pulse rate and pulse bar
2 x AAA batteries
Lanyard supplied
Measuring range
SPO2 35 to 99%
PR - 30 to 245 BPM
PR bargraph showing strength
+/- 1% for Spo2

+/- 1 BPM for pulse rate
70%-99% +/- 2%
70% - 80% +/- 3%
Weight Approx 50g including batteries
Dimensions 58 x 32 x 34mm
Battery life Circa 30 hours continuous measurement
Low voltage warning
Auto off








 a hanging rope
 a user manual
 a data line
 a disk (PC software)

Physical Identity
Dimension:58.5(L) 31(W) 32 (H) mm
Weight:About 52g (with the batteries)

  CMS 50D Plus Fingertip Pulse Oximeter with 24 hour Flash Memory


The CMS 50D Plus is a FDA cleared pediatric pulse oximeter, with alarm function and USB interface for downloading patient data for computer analysis. It is small in size, light in weight, and convenient to carry. High accuracy and repeatability. Suitable for family use, pediatricians, hospital, and community healthcare.

Oxygen saturation in hemoglobin measurement SpO2 (%)
Pulse rate measurement in beats per minute (bpm)
Stand alone data recording
USB interface with computer
Software to analyze, display and print your data
High and low programable alarms for SpO2% and pulse rate
Audible pulse signal
Four Orientation LED numeric six way display for easy reading
Pulse waveform graphical display or bar graph option
Adjustable display brightness
Store your favorite display setting
One button operation
Automatically turns off when not in use. Expected battery life in excess of 30 hours of use
AAA battery powered
Low battery alarm
1 Year Manufactures Warranty






Model: PM-60A    (Pulse oxymeter )
* Routine Check Mode and 
* Continuous Monitoring Mode 
* Data Graph and Trend Table Review 
* Rich Analysis Report 
* Perfect Mount Solution 
* Convenient operation by touch screen 
* Large SD card memory for more than 10,000 patient cases storage 
* Advanced analysis software for sleep study (Free with the oximeter) 
* Sync with PC based Software (WinXP and WinVista

Performance Specifications 
* Alarm:Adjustable High and Low limits. Three level audible and visual alarm 
* Display: 3.5" Color TFT 
* Resolution: 320x240 
* Display Mode: Standard face, Waveform face, 
Display Direction adjustable 
* Indicator:Power indicator light, Alarm sound, Pulse tone 
* Interface:One dual-purpose socket for connecting SPO2 sensors and communication cables 
* Power Supply:DC 5V, <200MA 
* Battery:Built-in Li-Polymer, 2 hours for charging, 8 hours for continuous working
* Trend Graph:Resolution from 1s, 5s, 10s. Maximum time 96 hours. 
* Trend Table:Resolution from 1s, 5s, 10s. Review up to 2000 items.



* Measurement Range:0 - 100% 
* Resolution:1% 
* Accuracy(+/-)2%(70%-100%, Adult/Pediatric) (+/-)3%(70% -100%, Neonate) 0% - 69% unspecified 
* Alarm Range:0% - 100% 
* Refreshing Rate:1s 
* Pulse Rate: 
* Measurement Range:25 - 250 bpm 
* Resolution:1bpm 
* Accuracy:(+/-)bpm 
* Alarm Range:25 - 250 bmp 
* Refreshing Rate:1s

Technical specifications 
* Safety 
* Meet the requirement of IEC60601 series 
* Type of Protection: Class II with internal electric power supply 
* Degree of Protection:BF 
* Dimension and Weight 
* Dimension:92(W)x82(H)x22(D)mm 
* Weight:136g(with battery)









 2003, All Rights Reserved, Frago Impex.
Star Designers