TABLE-TOP AUTOCLAVE

Fujikogaku, japan

1.Simple operation. Fully automatic, from sterilization to drying. The only operations necessary are opening the water supply valve to fill with water and setting the sterilization or drying time. All other operations, from sterilization to drying are performed automatically. Since a buzzer sounds and the power is automatically turned off and the machine stops simultaneously with the end of operation (the start of reduction drying to the steam track is automatic), it is extremely rational

2. Complete sterilization is guaranteed in a short time since air purging is performed by high performance purge valve, complete sterilization by saturated steam is possible. Since the sterilization pressure (temperature) rises to 0.21Mpa (132 C), complete sterilization is guaranteed in a short to 5 minutes.

3. Can be used with confidence. The thermostat controls the temperature and the bellows controls the pressure. And if he pressure should rise abnormally, a pressure safety valve operates. The sterilizing lamp can confirm optimum tightening of the door. If the door is not tight, this not turned on. A door handle disconnection prevention guide and double door to prevent scolding, etc. give priority o safety.

4. Can be used anywhere. Trouble-free. A sterilizer is used daily. Since the Hi Autoclave is especially designed to be rued after sales service is almost never required. It can be used by simply plugging the power cord into an ordinary wall socket (240V, 15A).

Form

HAC-220F

HAC-260F

HAC-316F

Sterilizing temperature

121 / 132

121

Pressure sterilization

0.12Mpa/0.21Mpa

0.12Mpa

Sterilizing room

Depth diameter 350 mm 220 mmX
(18cm round que storage Kast 2)

Depth diameter 375 mm 260 mmX
(21cm round que storage Kast 2)

Depth diameter 421 mm 316 mmX
(27cm round que storage Kast 2)

Tank capacity

16 Three Liter

20 Liter

23 Liter

Heating

1200W stainless SHIZUHITA

1400W stainless SHIZUHITA

1500W stainless SHIZUHITA

Power consumption

AC-240v 1200W 50/60Hz

AC-240v 1400W 50/60Hz

AC-240v 1500W 50/60Hz

Dimensions

Depth 466 mmX opening height of 367 mm 430 mmX

Depth 498 mmX opening height of 387 mm and 498 mmX

Depth 590 mmX opening height of 447 mm 590 mmX

Weight

29Kg

31Kg

52Kg

Accessories

Hughes X1 SUNOKO X1 aquarium lid X1

F Series (size 3) HAC FULL AUTO 'F' SERIES (Japanese Made)
FRAGO IMPEX SDN. BHD.
107, Jalan 17/42, Taman Lawa, Kuala Lumpur, MALAYSIA.
Tel:00-603-62525637 FAX:603-62533476 E-mail: lasani@fragoimpex.com

MANUFACTURER OF SURGICAL / DENTAL INSTRUMENTS.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Techinal Data

    Overall Dimensions - l/w/h (mms) 580 x 580 x 430

         Chamber Dimensions - d/l - (mms) 257 x 451

         Weight (kgs) 46

         Electrical Connection - 230v, 13amp

         Standard cycle without drying - 22 minutes

         Standard cycle with drying - 45 minutes


SES 225B
VACUUM AUTOCLAVE
With JKKP
(Certificate)

22 liters, 15 trays or HFiT10 capacity when using examination trays or HFiT10 cassettes

Large chamber capacity is ideally suited for multi chair surgeries

B Type Vacuum model with rapid non vacuum cycles

One touch operation

Self checking cycles

Twin water reservoirs provide clean steam every cycle

Direct drain option

Direct Data Download to PC
Integral Printer option
BS EN13060 compliant

   
       
       

 


Simple to use
Microprocessor controlled preventing operator error. The hygienic 'touch panel' controls activate a choice of cycles provided by the SES 2000 autoclave. Select the appropriate temperature option for the load type, and with one touch it's in operation. It is so simple, anyone can work it
Reassurance
An optional printer is available for the SES 2000 autoclave which will enable a permanent record of each procedure to be kept. This means reassurance for both you and your patient
.

Rapid 12 minute cycle
The 134C without drying cycle takes only 12 minutes. Three other cycles are available: 134C with drying and 121C with and without drying. Time includes condensing.

An examination tray and a standard tray is included with each unit.

   
SES 2000
Autoclave

With JKKP
(Certificate)

(N Type)
Features
Safe
Autoclaves are widely acknowledged as the best way to sterilize equipment and instruments efficiently and effectively and achieve a standard of sterilization that cannot be equalled.

The risks of contamination and possible cross-infection resulting from trapped air are eliminated with confidence. In the fight against the transmission of Hepatitis B and HIV, the SES 2000 autoclave is a potential life-saver too.
Simple to use
Microprocessor controlled preventing operator error. The hygienic 'touch panel' controls activate a choice of cycles provided by the SES 2000 autoclave. Select the appropriate temperature option for the load type, and with one touch it's in operation. It is so simple, anyone can work it

Chamber size
The SES 2000 autoclave is available in two chamber sizes
11 liters chamber (20cm diameter 35cm long )
16 liters chamber (20cm diameter 50cm long )

     
       

 

 

 


Safety:
Door protection locking system prevents the cycle from starting unless the door is properly locked, and also prevents the door from openning if there have pressuer in the chamber.
Pressure safety valves prevent over pressurizeation in chamber and generator.
A safety fuses prevent over heating in the chamber and generator.
Able to detect and identify the exact cause of any problem by warning and showing a specific error code.
Water level switch in the water tank, controlling the max and min water level.

 

 

Product Name: Table Top Autoclve
Model: STE-16L-E
Capicity: 16L

Application:
Dental Clinics, Human Hospitals, Laboratory, Veterinary.

Sterilization Cycle Chart
 
 

 

Program
Solid 134, Solid 121, Wrapped 134, Wrapped 121, Liquid 134, Liquid 121,
Prion 134, Plastic 105
.
Feature
1. Class N thermodynamic autocalves, without vacuum pump.
2. Sterilization temperature: 121 and 134 degree Celsius.
3. Automatic autoclave and controled by micro-computer.
4. Display: Digital.
5. With  Printer interface.
6. The sterilization time and dry time can be adjusted by manual, ensure user obtain
    best sterilization effects according to private requirements.

7. Malfunction detection system, corresponding error code will be showed on the
    display once there is something goes wrong.
8. Warning system prevents starting a cycle if door is not properly locked.
9. Warning system for the overheating and overpressure

   
   
       

 

 

 

Class N Autoclaves

 

 

Class N

STE-8L-A

STE-12L-A

STE-16L-A

STE-18L-A

STE-23L-A

Chamber capacity

8L

12L

16L

18L

23L

Chamber Size

170X320

200X360

240X360

247X350

247X450

Steam generator

Atmospheric pressure

Rated Voltage

AC220V-240V(AC110V),50-60Hz

Main Fuses

T12A/250V(T20A/250V or 110V)

Nominal power

950W

1350W

1550W

1750W

1900W

Sterilization temperature

121C / 134C

Capacity of water tank

Approx2.5L(water at level Max) Approx0.5L(water of level Min)

Operation temperature

5-40 Centigrade

Outside size

345x340x530mm

445x400x590mm

445x400x590mm

480x465x590mm

480x560x690mm

Net Weight

28.9kgs

38.56kgs

45.56kgs

44.46kgs

48.76kgs

Noise

<60dB

Relative humidity

Max80%, non-condensing

Atmospheric pressure

76kPa-1 06kPa

8 Liters

The most simple and economical way to sterilize solids Instruments, with a single button selection of the sterilization Cycle of 121 and 134. LED windows of pressure, temperature and state allow you to view the status of the autoclave during the sterilization cycle. 

12 and 16 Liters

3 types program of sterilization for solid, packs, textile each with a choice of sterilization temperature between 121 o C and 134 o C and a special program for the disinfection of plastics with 105 o C. LED windows of pressure, temperature and state allow you to view the status of the autoclave during the sterilization cycle. 

18 and 23 Liters

7 sterilization programs, really an option for all types of advanced processes, solid, wrapped instruments, textiles and Prion. With LCD display that allows you to graphically observe the process and the state of the sterilization cycle. Everything needed for the operation is displayed on the screen, as the state of the door, the state of water tanks, temperature,

 

 

 

Class B Autoclaves

Technical Specifications:

Class B

STE-8L-A

STE-12L-A

STE-16L-A

STE-18L-A

STE-23L-A

Chamber capacity

8L

12L

16L

18L

23L

Chamber Size

170X320

200X360

240X360

247X350

247X450

Steam generator

Atmospheric pressure

Rated Voltage

AC220V-240V(AC110V),50-60Hz

Main Fuses

T12A/250V(T20A/250V or 110V)

Nominal power

1000W

1400W

1700W

1800W

1900W

Sterilization temperature

121C / 134C

Capacity of water tank

Approx2.5L(water at level Max) Approx0.5L(water of level Min)

Operation temperature

5-40 Centigrade

Outside size

345x340x530mm

445x400x590mm

445x400x590mm

480x465x590mm

480x560x690mm

Net Weight

39.5kgs

40.8kgs

47.8kgs

46.7 kgs

51kgs

Noise

<60dB

Relative humidity

Max80%, non-condensing

Atmospheric pressure

76kPa-1 06kPa


5. With automatic alarm of error code for any malfunction

Able to detect and identify the exact cause of any problem, alert on it and showing a specific error code.

6. With drying function

Class B: vacuum dry

8. Easy to operate

Control panels designed to be operated easily, enabling you to operate the autoclave quickly without wasting time in selecting programs to which you can access and start, pressing a couple times a couple of buttons

Product Features
1. Security:
Multiples levels of protection an autoclave very safe and easy to maintain over time.

* Warming system prevents starting a cycle if door is not properly locked.

* Triple Threat Protection for overheating and overpressure.

(1). The pressure protection system will automatically cut off the electricity supply once the temperature of chamber inside is abnormally changed. Motorola pressure sensor have been used to accurately sense the state of pressure inside chamber

(2). Temperature control system is using Japanese PT1000 temperature sensor, it is high precision, reliable service and prompt measure, ensure accurate and timely transmission of temperature fluctuation.
(3). The safety valve will release steam in case the pressure inside chamber is excess of normal levels.

2. Controlled by micro computer

Intelligent software supported on a powerful processor which monitors and inspects all times in the proper functioning of the autoclave and ensures the effectiveness of the sterilization cycle. Ability to schedule and customize cycle times to suit your own needs.
3. Printer port

With printing program that allows you to adapt a mini printer for a complete record of each cycle of sterilization. This report will print automatically when every sterilization cycle end.
4. Automatic control of water levels:

Automatic control of water in the tanks, with sensors that ensure proper state, emitting an audible and visual signal will be informed if there is any shortfall in water supply or the water used must be drained. The sterilization cycle will be canceled automatically preventing a possible overheating.
7. Design and style

Unique design, compact and elegant, designed for all types of facilities, adapting aesthetics to different environments.

 

 

 

 

     
INSTRUMENT STERILIZER
(ELECTRICAL WATER BOILING)
A sturdy and reliable model constructed from a single shell stainless steel sheet (AISI-304) with an insulated side lever for lifting the lid and perforated tray simultaneously. A thermostat fitted on the side has been set to cut-off the power supply at boiling point and a stopcock provided on the side is for draining the water out. The Sterilizer bottom is fitted with four rubber feet that provide good stability and insulation, when placed on a table. Operates on 220-240V/50Hz single phase A.C. mains. Supplied with a 3-pin power cord and an instruction manual in English.

Model Dimensions Power Tray dimensions
Code     L  x   W   x  H KW    L   x  W  x  H
25-101 300 x 150 x 125mm 1.00 kW 245 x 125 x 25mm
25-102 430 x 200 x 150mm 1.50 kW 355 x 180 x 25mm
25-103 510 x 200 x 150mm 2.00 kW 435 x 180 x 25mm

   
     

 

 

 

 

 

 

 

 

       
 

Dry Heat Sterilizer
Model.No RLP60D-Canbo

Main Supply 220V 50Hz
Power 600W
Warming Temp: 70 to 80 cc
Sterile Temp: 125 cc
Capacity: 50L
Weight 15kg
Overall dimension W430 x D330 x 630mm

One circle is 20 Minutes , means it will cutt off as temprature increase to 125 cc,

 
       

 

 

 

 

 

       
 

U.V STERILIZER

Model Violet Alimentation
Alimentation 230V50Hz
Absorbed Power 18 W
Fuse 2 x 1A
Dimention Outer 49 x 27 x 20 cm (LxDxH)
   
 

Principle of operation:
Cold Sterilization through irradiation with short wave ultraviolet rays

The vapor of mercury at to low pressure contained in the lamp, submitted to electric discharge, give out a short wave radiations that will be distribute for the 90% around the frequency of 253,7 nm, and in tall frequencies the lamp give out a visible light of bluish color. It is just around the 253,7 run that is developed the maximum germicidal power

A low radiation is gived ot on the frequency of 185 run and it provokes a small issue of ozone with deodorant effect

Germicidal action:
The ultraviolet radiations are lethal for the microorganisms.The quantity of radiation necessary to destroy a microorganism depends from the type of the microrganism and from the environmental conditions
The lethal dose of radiation UV for a determined microorganism depends therefore from the intensity of the source, from the exposure time and from other factors like temperature, damp and the reflection formalities of the rays
Our apparatus has been planned and built in way to maximize the effect of the radiations and to assure an optimal result in varied uses
It is ideal for a suitable maintenance of the tools after the sterilization

 

 

 

 

 

 

 

 

       
 

Dressing Drums are available in different sizes.
15 x 15"
18 x 18"
24 x 28" and so on.

sterilizer are made conforming to IS:3831 standard, made of 18/8 (AISI 304) grade stainless steel which has remarkable resistance to wear and tear, corrosion and heat. Shallow Sterilizers are seamless (deep drawn) as such are highly dependable & are guaranteed for thorough sterilization. All components are manufactured under utmost care and components are interchangeable

 

 

 

 

 

 

 

 

 

 

------------------------------------------------------------------------------
 2003, All Rights Reserved, Frago Impex.